Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CP PRYME® ABS A100HI-85 - ABS - Chase Plastics

Material Data Center offers the following functions for CP PRYME® ABS A100HI-85:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other CP Pryme datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 15 cm³/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
ASTM Data
Indice di fluidità a caldo, MFI 3.7 g/10min ASTM D 1238
Temperatura 230 °C -
Carico 3.8 kg -
Ritiro di stampaggio, parallelo 0.0065 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 2070 MPa ASTM D 638
Resistenza alla trazione di snervamento 41.4 MPa ASTM D 638
Resistenza alla trazione a rottura 31.7 MPa ASTM D 638
Allungamento a snervamento 2.1 % ASTM D 638
Allungamento a rottura 26 % ASTM D 638
Modulo a flessione 2140 MPa ASTM D 790
Resistenza alla flessione 68.3 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 370 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 97.2 °C ASTM D 648
DTUL a 264 psi 82.2 °C ASTM D 648
Temp.di rammollimento Vicat 98.9 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Densità 1050 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 82 - 93 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Umidità del Processo ≤0.1 % -
Temperatura dello stampo 49 - 71 °C -
Zona 1 188 - 210 °C -
Zona 2 204 - 227 °C -
Zona 3 216 - 238 °C -
Temperatura dell ugello 218 - 260 °C -
Contropressione 0.345 - 0.689 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet, Colore naturale
Caratteristiche speciali
Alto urto o modificato all'urto
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.